COMPOSET PRODUCTS L.L.C.
801-821-0964
Refund Policy: Product may be returned within 30 days of purchase, less actual outbound shipping cost and $25 re-package/re-stock
fee, unless any individual component of the kit has been opened, is missing, or has been used.
Ratcheting Spreader Clamps
$68.00
Quantity 2 - Ratcheting spreaders with foot pads extend between camper and wall to apply pressure to delaminated area. Includes instructions and clamping ideas.
includes 2 clamps
Large Siding Roller
Large, 7" wide roller surface and extented handle offer excellent leverage to help press resin into the substrates. Used for injection type repairs, as well as panel fabrication.
$45.00
plus shipping
Copyright www.delamrepair.com 2018-2023
plus shipping
Small Siding Roller
3" wide J-roller is used to help press resin into the substrates. Used for injection type repairs, as well as panel fabrication.
$21.00
plus shipping
Kit Content Comparison Chart
Basic kits come with all the recommended tools including correct flexible tubing, injection syringes,rigid pipe, gloves, Composet SLV® resin, calibrated mixing cups & more. PLUS kits include roller & larger syringes. Personal Project Analysis & Technical Support included with every purchase.
-These Kits are developed as an injection process when the wall is "closed" and the outer fiberglass has not fully pulled away from the backing.
-The inside of the wall must be dry and and in reasonable condition to re-bond the delaminated layers.
-This process requires good carpentry, fabrication, and repair skills. Clamping is required.
- Work Time is 40-minutes. Cure time is 24-hours
-The inside of the wall must be dry and and in reasonable condition to re-bond the delaminated layers.
-This process requires good carpentry, fabrication, and repair skills. Clamping is required.
- Application temperature is 60F to 80F.
- Work Time is 40-minutes. Cure time is 24-hours
Composet SLV® RV Delamination Repair Kits
These Kits are developed as a roll-on or brush process when the wall is "open". The outer fiberglass has fully pulled away from the backing.
This product will fill intermittent gaps up tp 1/8".
The inside of the wall must be dry and and in reasonable condition with exception of the delaminated layers.
This process requires good carpentry, fabrication, and repair skills.
Clamping is required.
Application temperature is 60F to 80F.
Work Tome is 40-minutes. Cure time is 24-hours
This product will fill intermittent gaps up tp 1/8".
The inside of the wall must be dry and and in reasonable condition with exception of the delaminated layers.
This process requires good carpentry, fabrication, and repair skills.
Clamping is required.
Application temperature is 60F to 80F.
Work Tome is 40-minutes. Cure time is 24-hours
Composet CompoBond® RV Panel Repair Kits
| 1.25 qt | 2.5 qt | 3.75 qt | ||
|---|---|---|---|---|
| 1.25 qt CompoBond | 1 | 2 | 3 | |
| Adhesive roller sleeve | 1 | 1 | 1 | |
| Mix Cups | 2 | 2 | 3 | |
| Mix Sticks | 4 | 2 | 2 | |
| Spreader | 1 | 2 | 2 | |
| SmallTrowel | 1 | |||
| Large Trowel | 2 | 2 | ||
| Gloves | 4 | 6 | 6 | |
| Instructions | 1 | 1 | 1 |
RV Panel Repair Kit Content Comparison Chart
CompoBond 1.25 quart
RV Panel Repair Kit
RV Panel Repair Kit
CompoBond 2.5 quart
RV Panel Repair Kit
RV Panel Repair Kit
CompoBond 3.75 quart
RV Panel Repair Kit
RV Panel Repair Kit
$128.00
$215.00
$296.00
Tools and Accessories
$245.00
$120.00
$221.00
$299.00
$349.00
#12 Kit
#24 Kit
#24 PLUS Kit
Master Kit
Master PLUS Kit
| #12 Kit | #24 Kit | #24 PLUS | Master Kit | Master PLUS | ||
|---|---|---|---|---|---|---|
| Composet SLV qts. |
1.2
|
2.4
|
2.4
|
3.6
|
3.6
|
|
| 60cc syringes |
4
|
6
|
6
|
8
|
8
|
|
| 150cc syringes |
|
|
1
|
|
2
|
|
| mix cups |
2
|
4
|
4
|
4
|
4
|
|
| small flex tube |
4'
|
6'
|
6'
|
8'
|
8'
|
|
| large flex tube |
2'
|
3'
|
3'
|
4'
|
4'
|
|
| small pipe |
12"
|
12"
|
18"
|
12"
|
18"
|
|
| large pipe |
|
|
12"
|
12"
|
18"
|
|
| small roller |
|
|
1
|
|
|
|
| large roller |
|
|
|
|
1
|
|
| squeeze bottle |
|
1
|
1
|
1
|
1
|
|
| shims |
4
|
6
|
8
|
12
|
12
|
|
| trowel |
1
|
2
|
2
|
2
|
2
|
|
| 3M yellow tape |
|
|
1
|
1
|
1
|
|
| mix sticks |
4
|
6
|
6
|
8
|
8
|
|
| nitrile gloves |
4
|
6
|
6
|
8
|
8
|
|
| instructions |
1
|
1
|
1
|
1
|
1
|
|
Kits include the original proprietary Composet SLV® or Composet CompoBond® formulations developed for use in RV, Motorhome, and Camper fiberglass siding repair. Composet SLV® and Composet CompoBond® bonding resin is a dedicated system developed to adhere and re-bond water damaged RV walls without melting the styrofoam insulation.
Composet SLV® RV Floor Repair Kit
Contents
1.2 quarts Composet SLV™ bonding system
30 5/16" x 12" dowels
1 8 oz dispensing bottle
2 60cc syringes
2 calibrated mixing cups
4 nitrile Gloves
4 mixing Sticks
1 large tweezer
1 squeegee
1 putty knife
1 Instruction Sheet
1 Data Sheet
1 Project Anaylsis and Tech Support
1.2 quarts Composet SLV™ bonding system
30 5/16" x 12" dowels
1 8 oz dispensing bottle
2 60cc syringes
2 calibrated mixing cups
4 nitrile Gloves
4 mixing Sticks
1 large tweezer
1 squeegee
1 putty knife
1 Instruction Sheet
1 Data Sheet
1 Project Anaylsis and Tech Support
$122.00
This kit includes materials and tools used to stiffen soft RV "sandwich" floors. The kit uses the Composet SLV™ repair resin and wood dowels to help repair soft RV floors and does not damage stryofoam insulation.
Included are detailed instructions, injection syringes, mix tools, dowels, drill bit and other tools.
Included are detailed instructions, injection syringes, mix tools, dowels, drill bit and other tools.
March Sale Pricing Save 15% Discounted prices are shown!
March Sale Pricing Save 15% Discounted prices are shown!
plus shipping